banjalukaforum.com

poz svima

kao sto vidite instalirao sam ubuntu 5.04 ali kako bi bilo zanimljivije sa njim sam dobio i i neki problemcic

naime imam integrisanu intelovu graficku kartu i zaglavio sam na rezoluciji 640 x 480 , zamislite samo , ikonica zauzela pola monitora.

pokusavao sam svasta, skidao neke drivere sa intelove stranice, editovao xorcfg (po uputama sa raznih foruma) ali nista. mozda bih nesto i uspio da mi ovo nije prvi linux koji sam instalirao. mislim da je u pitanju neka caka koju mi moze pomoci rijesiti neki napredniji korisnik linuxa. naime neki driveri koje sam skinuo imaju ekstenziju .deb a ja stvarno neznam kako se oni instaliraju. znam postupak sa tar.gz ali ovo nikako. imam jos neke drivere sa nekom drugom ekstenzijom ali neznam ni njih instalirat. zanima me da li postoje razlicite vrste instalacijskih paketa zavisno od distribucije linixa i jel potrebno neko konvertovanje? izvinite ako su pitanja malo glupa, ipak sam ja pocetnik!! ako je neko imao slican problem ili ako zna rjesenje neka se javi.

Prvo jedan link: http://ubuntuguide.org/

Otvoris terminal
$ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_beckup

$ sudo gedit /etc/X11/xorg.conf

Saznas HorizSync i VertRefresh svoga monitora (PAZI MORAS BITI SIGURAN)
pa zamjeni (crveno oznaceno) sa svojim u toj sekciji (crveno oznaceno)

# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 60.0
VertRefresh 60 - 75
Option "DPMS"

EndSection

ovo sto si mi predlozio sam vec radio ...... bezuspjesno .......

moze biti da nesto nisam dobro uradio pa je to problem ali cisto sumnjam.
najbolje bi bilo kada bih mogao naci drivere koji su tar.gz formatu.


ako neko ima jos neko rijesenje nek se javi .....

Pogledaj u screen sekciju jesu li ti sve rezolucije podzane, I koju kartici imas. ili iskopiraj sve iz xorg.conf -a.

#**********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24

Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "700S"
Option "DPMS"
HorizSync 30-80
VertRefresh 56-76
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "700S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

Jeli MONITOR LG CRT 17" 700S http://ccp.nectec.or.th/service/mon.pdf tvoj monitor.

Mislim da je tu greska nemoze biti max. VertRefresh 76 manji od Max. HorizSync 80
Horizontal Frequency 30 - 70KHz
Vertical Frequency 50 - 160Hz

???????????????????????????????????? Radi li ????????????????????????

nazalost ne radi. izvini sto ti nisam do sad odgovorio, nisam bio kuci.
probao sam ovo ali nista, isto kao sto je i bilo. ako imas jos neko rijesenje javi. postavio sam pitanje i na http://ubuntu.fsn.org.yu/forum/
pa ako hoces navrati da vidimo sta ce tamo reci. pozdrav

>> System >> Preferences >> Screen Rezolution

Dali tu mozes izabrati jos koju rezoluciju ili samo "640x480" i koja je Frekve..
ako ne probaj ovako:
$ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
$ sudo gedit /etc/X11/xorg.conf
pa izbrises sve "640x480" i "720x400"
>> Press 'Ctrl + Alt + Backspace'
ponovo se logiras.

ili jesi li probao napraviti komandu $sudo dexconf to ti vraca xorg.conf na Default pa pogledaj opet u
>> System >> Preferences >> Screen Rezolution

A da moras u xorg.conf opet namjestit frekvu....svog monitora
Horizontal Frequency 30 - 70KHz
Vertical Frequency 50 - 160Hz


Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "700S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

sto se tice refresha, maximalno je 65 Hz. a ovo cu tek da probam pa cu da ti javim. nasao sam nesto ali mi nije bas jasno http://ubuntuforums.org/archive/index.php/t-22977.htm. ako mozes pogledaj pa mi malo pojasni

poz i hvala na svemu do sad

nema HorizSync 30 - 70KHz
VertRefresh 50 - 160Hz
pa predlazu da upise



Section "Monitor"
Identifier "Gateway EV730"
Option "DPMS"
EndSection



Mozes jos jednom kopirat svoj xorg.conf

kopirat cu ti sutra da ne prelazim sad na linux.

jos nesto ti trebam reci, kad sam uradio prelazak na default , sjetio sam se (a sada video) da u section monitor kod mene uopste nije ni postojalo horyz sync i te ostale zezalice nego sam ja to sam dodavao.

poz

Zašto ne pokreneš xorgconfig i na taj način podesiš X server umjesto ručno da to radiš?

_________________
"I'd take the awe of understanding over the awe of ignorance any day."
- Douglas Adams

[color=indigo]
nema HorizSync 30 - 70KHz
VertRefresh 50 - 160Hz
pa predlazu da upise



Section "Monitor"
Identifier "Gateway EV730"
Option "DPMS"
EndSection[/color]


uradio sam ovo i sad ne mogu dici linux u grafickom modu nego nesto kao terminal ali kao dos. jel ima neka komanda koja vraca sve na default pa da se to popravi?
da li mozda postoji nacin da vratim onaj xorg.conf koji sam napravo kao backup?
sad sam zaglibio

vidi se da si neiskusan zato i pravis beckup

$ sudo cp /etc/X11/xorg.conf_beckup /etc/X11/xorg.conf

daj iskopiraj taj xorg.conf da vidim sto si zezno

he he malo je reci neiskusan, ovo mi je prvi linux a pun sam problema.

sad cu probat ovo pa da vidim hocu li moci dici normalno.


hvala na brzim odgovorima.

he he iskopirao sam backup i i uspio sam dici linux. evo ti xorg.conf po defaultu, nista nije mijenjano. nesto sam razmisljao. ako si ti rekao da umjesto :
Section "Monitor"
Identifier "700S"
Option "DPMS"

treba staviti
Section "Monitor"
Identifier "Gateway EV730"
Option "DPMS"
EndSection

onda treba zamjeniti i u ovom djelu

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "700S"
DefaultDepth 24
SubSection "Display"

ili je to sve samo plod moje maste . stvarno neznam!!



xorg.conf ----->>

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "700S"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "700S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

Sad cemo korak po korak backup je obavezan
$ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
$ sudo gedit /etc/X11/xorg.conf

upisi sto je crveno i napravi restart javi. Ova oznaka monitora je tvoja 700S
Izvini na izmjeni


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# sudo sh -c 'md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum'
# sudo dpkg-reconfigure xserver-xorg

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "700S"
HorizSync 30 - 70
VertRefresh 50 - 160
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
Monitor "700S"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

ne mogu da vjerujem

RADI


uradio sam ovo sto si mi rekao i uspeo sam napravit rezoluciju.

linuxluka legenda si prava


e sad novi problemi ako ti nije frka da mi pomognes jos nesto

naime znas da je kod linuxa modem najzeznutiji. e sad ja imam drivere i znam ih instalirat ali mi javlja neki problem sa kernelima, nesto u fazonu da nedostaju ili vec tako nesto. na par mjesta sam nasao da ih treba instalirati sa cd ali ja neznam kako... vjerujem da ovo nije problem za tebe

poz ljudi

samo da kazem da sam digao drivere za modem ali imam problema sa konektovanjem. jel zna neko kako se podesva wvdial? probao sam preko pppconfig i napravim konekciju ali kad kucam pon nista se ne desava. modem mi je u winu na com 3 sto znaci da je tamo /dev/ttyS2 .

help